MFOG-095 is a precision micro-nano fiber optic gyroscope for UAV navigation, robotic stabilization, and autonomous platforms.
Its Sagnac-based design ensures low bias drift (≤2°/h), minimal noise, and high angular rate accuracy, making it ideal for drone gyroscopes, mapping instruments, motion control, and INS applications.
Compact (60×35×25.5 mm) and lightweight (≤70 g), it is a drop-in replacement for Fizoptika VG095, providing a fully compatible FOG sensor solution for civilian and industrial navigation systems
Composition
The product is mainly composed of the following components:
A) an optical path assembly;
B) Detection and control signal circuit board;
C) Optical fiber coil skeleton, shell and other structural parts;
4.3 Appearance and dimension
The overall dimension of the product is 60mm × 35mm × 25.5mm (without plug).
4.4 Weight
≤70g.
4.5 Operating temperature
-40℃~+70℃.
4.6 Storage temperature
-55℃~+85℃.
4.7 Random vibration
Random vibration level: 20g, frequency range: 20Hz ~ 2000Hz.
4.8 Main performance parameters
Table 1 Main Performance Parameters
| Serial number | Project | Performance indicators |
| 1 | Range (°/s) | ±150 |
| 2 | Scale factor (mV/ o /s) | ≥10 |
| 3 | Zero-bias stability (10s, 1σ, o /H) | ≤2 |
| 4 | Zero-bias repeatability (1σ, o /H) | ≤2 |
| 5 | Zero bias (°/s) | ≤0.05 |
| 6 | 3dB Bandwidth (Hz) | ≥1000 |
| 7 | Random walk ( o /√ H) | ≤0.02 |
| 8 | Start-up Time (s) | ≤1 |
| 9 | Power supply (V) | 5+0.15 |
| 10 | Power Consumption (W) | ≤0.7 |
4.9 Mechanical and electrical interfaces
4.9.1 Mechanical interface
The bottom surface of the product is the installation surface. The four M3 threads on the bottom surface are connected to the outside. The overall dimensions and installation interfaces are as follows:
4.9.2 Power Requirements
The requirements for the external power supply to the product are shown in Table 2:
Table 2 Product Power Supply Requirements
4.9.3 Electrical interface
The MFOG-095 micro-nano fiber optic gyroscope is electrically connected to the outside with a solder pin.
Table 3 MFOG-095 Node Definition
| Number | Definition | Remark |
| 1 | TS | TMP temperature sensor signal conversion relation T=(TS-750)/10+25 The unit is mV, and T is the Celsius temperature. |
| 2 | 5V | |
| 3 | Out- | Differential Output |
| 4 | Out+ |
| 5 | GND | Power ground |
Product Tags:
|
|
Cost-Effective FOG Sensor for Industrial Automation and Robotics Images
|
